How to measure - Circular

Tape measure icon How to measure correctly? (Circular / oval model)

A: Measuring on the opening frame?
➜ Add +2 cm all around (hook-and-loop tape of 2 cm around the entire circumference).

B: Measuring on the final fitting frame (outside / inside)?
➜ Add nothing. Measure the desired final dimension directly.

Information icon Specific to the circular / oval model
✅ Perfect circle

If your opening is a perfectly round circle, only one measurement is needed:

  • Diameter (D) : from one edge to the other, through the centre.
Measuring diagram for circular magnetic screen – diameter
✅ Oval / imperfect circle

If the shape is oval or slightly irregular, please give:

  • Maximum width (W max)
  • Maximum height (H max)

➜ From these two dimensions, we calculate the curve automatically.

Information icon

Important tip: always round up to the next inch.
➜ Better a bit too big than too tight 😉

Tip icon

Fitting tip: clean and dry the surface thoroughly before applying the hook-and-loop tape for the best hold.