How to Install

Fitting a Moskera mosquito screen is quick and easy: it takes about 10 minutes, with no drilling and no tools. The magnetic system attaches around your door or window frame using self-adhesive velcro strips. Follow the 5 steps below to install your screen yourself, or watch the video to see it in action.

5 Easy Installation Steps

1

Carefully clean the frame of your door with a damp cloth, then let it dry for 1 minute.

2

Unroll the double-sided tape, measure it, then cut it into 3 pieces (2 equal heights and 1 width).

3

Remove the adhesive backing from each strip, then apply them around the edge of your frame (except at the bottom).

4

Press firmly on each Velcro strip to ensure maximum hold. If needed, add extra tape or small nails depending on your frame type.

5

Attach and align the magnetic fly screen, Velcro to Velcro. Check positioning and adjust if necessary. Enjoy your screen and a bug-free summer!

🔹 Note: The magnets are already integrated and discreetly hidden in the centre strip of the fly screen.


Installation Video:

 

Fitting tips for your setup

  • Door opening inward : fit the screen on the outer frame.
  • Door opening outward : fit it on the inner frame.
  • Sliding door : place the screen on the outside of the fixed frame.
  • Frame on a brick wall : you can attach the screen directly to the wall.
  • Screen too long : do not cut it, fold the bottom and have it sewn by a tailor.

Related guides

Need another made-to-measure screen? Configure another opening →