How to Install
Fitting a Moskera mosquito screen is quick and easy: it takes about 10 minutes, with no drilling and no tools. The magnetic system attaches around your door or window frame using self-adhesive velcro strips. Follow the 5 steps below to install your screen yourself, or watch the video to see it in action.
5 Easy Installation Steps
Carefully clean the frame of your door with a damp cloth, then let it dry for 1 minute.
Unroll the double-sided tape, measure it, then cut it into 3 pieces (2 equal heights and 1 width).
Remove the adhesive backing from each strip, then apply them around the edge of your frame (except at the bottom).
Press firmly on each Velcro strip to ensure maximum hold. If needed, add extra tape or small nails depending on your frame type.
Attach and align the magnetic fly screen, Velcro to Velcro. Check positioning and adjust if necessary. Enjoy your screen and a bug-free summer!
🔹 Note: The magnets are already integrated and discreetly hidden in the centre strip of the fly screen.
Installation Video:
Fitting tips for your setup
- Door opening inward : fit the screen on the outer frame.
- Door opening outward : fit it on the inner frame.
- Sliding door : place the screen on the outside of the fixed frame.
- Frame on a brick wall : you can attach the screen directly to the wall.
- Screen too long : do not cut it, fold the bottom and have it sewn by a tailor.
Need another made-to-measure screen? Configure another opening →